Doggie Bookcase

So I was thinking more about that scroll saw wasting away in the shed and thought I should do something with it. But what?? Well after some research I saw this super cute Elephant Bookcase on Design Public. I wondered if I could make something like it with the scroll saw for Con-Man.
I don't know if Con-Man likes Elephants or not, but I know he loves Gracie, she's a dog, so maybe he likes dogs? After some thought I though a wiener dog might make cute bookcase.


If you think you'd like to make one of your own you'll need:


1 piece of Pine Board 7" tall (Try to look at a few and find one that is not warped and has few knots)
A scroll saw or jig saw with a fine blade
Wood Glue
Sand Paper
Paint and Pencil


 I sketched an image of a wiener dog to the size I needed- approximately 7" tall by 12" long. Then I traced out the shape on a piece of wood. (Download the Dog Templates to trace here: Dog Bookcase Templates )


My saw can't handle wood much larger than 1" so I traced the dog template 3 times then cut each out with the saw.




Once I had my 3 shaped cut out I glued them together with the wood glue and set it under some heavy books overnight to dry.

Ta da! I then sanded it down with the attachment on the saw to smooth out the edges. (It didn't dry perfectly straight and since its my first time using a scroll saw I had some jaggedy edges..) If you don't have a power sander sanding by hand will work just fine but may take a little longer.

Using some leftover paint I painted and sealed the bookcase. Check out the finished product in Con-Man's room:




The wood was only $5 and this didn't take a incredibly long time, I just had to spread it out over a couple of days because of work and taking care of Con-Man. And getting the hang of the scroll saw wasn't that bad either. You can tell which was my first and last cut out. It might be fun to try some other shapes- a dinosaur, snail, strawberry. I'd love to see what other people come up with!